Headstock Bearings and Seals: Yamaha TY125 TY 125 (1982) Honda TLM50 They have been manufactured to

They have been manufactured to replace the original set of head stock bearings on an FJ600 for the years and models shown above

This fuel tap has been manufactured to replace the original petrol tap on a Honda CB400 for the years and models shown above

This ignition coil pack with spark plug cap is manufactured to replace the original coil on a Yamaha YZ250

Yamaha TDR 250 (TPVS) (1991-2002)

Headstock Bearings and Seals: Yamaha TY125 TY 125 (1982) Honda TLM50 They have been manufactured toBrand new set of headstock steering bearings and seals to fit: Yamaha TY 125 (1982). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha TY125 for the years and models shown above. Top sized: 25mm x 43mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. The seal thickness is